5-13. DUST COVER ASSEMBLY MAINTENANCE
(1) Remove screw (1), washer (2) and safety
chain (5) from adaptor (3).
(2) Separate dust cover assembly (4) from
b. Cleaning. Clean dust cover assembly parts as
c. Repair. Repair is limited to replacement of dust
(1) Attach safety chain (5) to adaptor (3) with
washer (2) and screw (1). Tighten screw
to 160 to 200 pound-inches.
(2) Install dust cover assembly (4) on adaptor
5-14. PRESSURE CAP MAINTENANCE INSTRUCTIONS.
This task covers:
Tools, Special Tools and Test Equipment
Cross Tip Screwdriver, No. 2
Special Environmental Conditions