ARMY TM 9-2805-259-14
AIR FORCE TO 38G2-89-54
NAVY NAVFAC P-8-615-14E
c. Installation
a. Removal
b. Inspection
This task covers:
INITIAL SETUP
Equipment Condition
Tools
Materials/Parts
Gasket, Breather Tube Mounting
(NSN 2805-00-937-0943)
Remove three screws (1) and washers (2) and remove breather tube (3) and gasket (4).
WARNING
Drycleaning solvent PD-680 used to clean parts is potentially dangerous to personnel and
property. Avoid repeated and prolonged skin contact. Do not use near open flame or
excessive heat. Flash point of solvent is 100F.-138F. (38C.-60C.).
(1) Clean breather tube in drycleaning solvent, and dry thoroughly.
(2) Ensure there are no obstructions in breather tube (3).
Installation. (figure 4-7)
c.
(1) Ensure gasket mounting surfaces are clean and free of old gasket material.
(2) Install breather tube (3) and gasket (4) and secure with three screws (1) and washers (2).