ARMY TM 9-2805-259-14
AIR FORCE TO 38G2-89-54
NAVY NAVFAC P-8-615-14E
4-22. Oil Pan Cover, Shroud and Baffle Plate.
b. Installation
This task covers:
a. Removal
INITIAL SETUP
Tools
Equipment Condition
a. Removal. (figure 4-13)
(1) Tag and remove lead from choke solenoid (1).
(2) Tag and remove leads from starter solenoid (2).
(3) Remove two nuts (3), Iockwashers (4), flat washers (5) and screws (6) and remove starter (2).
(4) Loosen clamp (7) and remove hose (8) from air cleaner (9).
NOTE
Some engines are not equipped with seats.
(5) Remove eight nuts (10) and remove exhaust manifold (11) and seats (12).
(6) Remove two screws (13) and washers (14) and remove baffle plate (15).
(7) Remove four posts (16), Iockwashers (17), and flat washers (18) and remove oil pan cover (19).
(8) Remove six screws (20) and washers (21) and remove oil pan shroud (22).
b Installation. (figure 4-13)
(1) Install oil pan shroud (22) and secure with six screws (20) and washers (21 ).
(2) Install oil pan cover (19) and secure with four posts (16), Iockwashers (17) and flat washers (18).
(3) Install baffle plate (15) and secure with two screws (13) and washer (14).
(4) Install exhaust manifold (11 ) and seats (12) and secure with eight nuts (1 0).
(5) Install hose (8) and tighten clamp (7).
(6) Install starter (2) and secure with two screws (6), flat washers (5), Iockwashers (4), and nuts (3).
(7) Connect leads to starter solenoid (2) as tagged.
(8) Connect lead to choke solenoid (1) as tagged.