ARMY TM 9-2805-259-14
AIR FORCE TO 38G2-89-54
NAVY NAVFAC P-8-615-14E
b. Installation
This task covers:
a. Removal
INITIAL SETUP
Materials/Parts
Tools
Gasket, Rocker Arm Cover Mounting
(NSN 5330-00-073-3023)
a. Removal.
(1) Remove three assembled screws and washers (1) and remove rocker box cover (2) and gasket (3).
WARNING
Drycleaning solvent PD-680 used to clean parts is potentially dangerous to personnel and
property. Avoid repeated and prolonged skin contact. Do not use near open flame or
excessive heat. Flash point of solvent is 100F.-138F. (38C.-60C.).
(2) Clean rocker arm cover (2) in drycleaning solvent, and dry thoroughly.
(3) Inspect rocker arm cover for cracks and replace if cracked or otherwise damaged.
(4) Repeat steps 1 through 3 for remaining rocker box covers.
Installation. (figure 4-48)
b.
(1) Install rocker box cover (2) and gasket (3) and secure with three assembled screws and washers (1).
(2) Repeat step 1 for remaining rocker box covers.