CHAPTER
3
LUBRICATION
LUBRICATION
RECOMMENDED
LOCATION DESCRIPTION and
LUBRICATION
LUBRlCANT
POINT NO.
INTERVAL *
SERVICE RECOMMENDATIONS
High quality, rust and oxidation
inhibited, medium hydraulic and
general purpose industrial oil.
1
Variable Pulley. 1 oil cup.
WEEKLY
ASTM Grad. No., 215.
Post. Post Elevation Screw and Gears.
MONTHLY
2
Clean and apply oil.
Table Trunnion. Oil tilt surfaces.
MONTHLY
3
Transmission. 1 quart capacity. Proper
High quality, rust and oxidation
oil level must be maintained. Drain and
AS REQUIRED
4
inhibited, medium hydraulic and
refill yearly or when required.
general purpose industrial oil.
Transmission Shift Linkage and Interlock.
AS REQUIRED
5
Clean and apply oil as required.
ASTM Grade No. 315.
Speed Change Screw and Linkage. Clean
CK. MONTHLY/
6
and apply oil
AS REQUIRED
Miscellaneous, Hinges. Pivots, etc. Clean
CK. MONTHLY/
7
and apply oil
AS REQUIRED
Accessory Equipment as Supplied. Keep
clean and apply oil as required to main-
CK. MONTHLY
8
tain proper function and reduce wear,
corrosion, etc.
(For 80 F. and above)
High quality. rust and oxidation
inhibited, medium hydraulic and
Proper oil level must be maintained;
general purpose industrial oil.
drain and refill every three months.
CHECK WEEKLY
9
ASTM Grade No. 465.
clean.
Premium quality, multi-purpose,
lithium base, EP (extreme pres-
sure) grease.
Band Tension Screw and Bearing.
3 MONTHS
10
3 grease fittings.
NLGI Grade No. 2.
Dry, powdered lubricating graphite
Air Pump, Remove air intake filter and
CK. MONTHLY/
(natural or manufactured).
while pump is in motion, feed lubricant
11
AS REQUIRED
into opening. Keep air filter clean.
Lubricate as required per manufacturer's recommendations.
Electric Motor
12
Lubricate as required per DBW-15 Instruction Manual.
DBW-15 Welder.
13
Premium quality, sew band
Mist Coolant Tank. (optional item)
CHECK DAILY/
coolant and lubricant.
14
1 quart capacity. Keep filled.
AS REQUIRED
cutting fluids and/or oils.
* Lubrication intervals are based on an 8 hour day, 40 hour week. Lubricate more often when required.
15