UNIVERSAL VISE (Air powered table only)
With this accessory, the operator can rapidly clamp and unclamp work by means of a lever-
operated eccentric. The universal vise applies positive work holding pressure needed for
accurate production cut-off work. The angle of cut-off is accurately adjusted from 0 to 45
degrees by means of a pointer and protractor. The table T slots allow quick and easy
removal of the vise. An adjustable cut-off gage assembly mounts in a T slot on the left
side of the table to allow duplicate cut-off operations for production runs.
The universal vise jaws are
clamped in a table T slot and
set at the desired angle. The
cut off gage is mounted in the
left-hand T slot.
MACHINE SPEED CLAMP (Air powered table only)
The machine speed clamp is specifically designed to hold fiat or odd-angle work to the machine
table. The clamp is held on the table by means of a 1/2 inch T-bolt in the table slot. The
clamp head is self-aligning; it automatically adjusts to the angle of the workpiece surface. The
capacity of this clamp is 0 to 8 inches (0 to 200 mm), and the approximate maximum clamping
pressure at 4 in. is 1000 Ibs. The cam action handle is provided with a quick release operated
by thumb pressure.
The machine speed clamp
mounts in the table T slot.
The clamp head automatically
adjusts to the shape of the
workpiece .
31