TM 9-3418-201-14&P
SERVICE
AND
MAINTENANCE INSTRUCTIONS
SINGLE STAGE
SINGLE AND DOUBLE
VANE PUMPS
OPERATING CHARACTERISTICS
OPERATING FLUID ..... 150 S.S. U. at 100F
TYPE .................................. Balanced Vane, Fixed Delivery
SERIES ................................. Single and Double, Single Stage
MOUNTNG ........... Face, Foot, Flange, Electric
OPERATING PRESSURE. ...... See Performance Data
Motor End Bell
INPUT SPEED, RPM................ See Performance Data
CONNECTIONS ...... Pipe Thread Body Ports or Flanges
Performance data is based on input speed at 1200 rpm , pumping
petroleum base fluid at 1200 F. Minimum recommended drive speed for
all series is 600 rpm,. Characteristics at other drive speeds are
approximately proportional to rpm . For performance data when using!
other than petroleum base fluids, see applicable Installation drawing ,
shown on page 25.
16