INSTALLATION OF BRAKE SHOE
Do not tighten bolt A down tight to shaft B . Back off bolt A until brake rocks in flat on
shaft B Then tighten lock nut C . Tighten shaft B on opposite end with bolt D and lock
nut E on large bolt F next to bolt D . Do not tighten all the way down on shaft. Back off
until pin H on end of bolt F is just riding inside groove on shaft freely. Then tighten lock
nut G securing in place.
Bolt D is a set screw on some models
INSTALLATION OF BRAKE SHOE (CHY-BA)
Position Shaft C so the flat portion is facing bolt A with
the brake shoe in position on the pulley. Tighten bolt A
then back it off one full turn. Tighten lock nut B securely.