(2) HONE THE PART Use a truing sleeve. Finish hone by simply changing the stone (and truing if necessary.
REMEMBER, mandrel will take several ranges of stones as well as many different grits and grades.
Never allow machine to force the drive wedges out of their normal range. Use the lock nuts provided on
the mandrel for jobs requiring great accuracy and/or size control. MANDREL IS FACTORY ADJUSTED.
DO NOT DISASSEMBLE.
(3) CHECK THE WORK. If stone is too short for length of work, use a blind hold stone or a double stone mandrel. If a
double stone mandrel is used, finish with a truing sleeve. If stone is too long for length of work, simply
grind off to the desired length using a feather edge if extreme accuracy or size correction is desired.