APPENDIX A
TM 9-3431-254-14&P
Parts List
EQUIPMENT IDENTIFICATION - An identification plate on the unit's control panel shows its model number, serial
number, and specification number. Whenever ordering parts or making inquiries, furnish all these numbers.
NOTE: A "specification number" must have a "dash number" suffix (-1, -2, -3, etc.)
in order to be a complete number.
HOW TO USE THIS PARTS LIST - The part name listings may be indented to show part relationships as indicated
In the following example.
Units
Fig. Item
Part
Application
per
No.
No.
No.
Nomenclature
Assembly
Code
1-
123456
Assembly (Not Shown)
1
234567
1
. A detail of assembly
1
345678
2
. A sub-assembly
1
456789
3
. . A detail of sub-assembly (Item 2)
1
4
567891
. . A sub-assembly of Item 2
1
5
678910
. . . A detail of sub-assembly (Item 4)
1
Locate the specification number below that appears on your unit, and note the "APPLICATION CODE" letter adjacent
to it. (If no application code appears below, the parts list is applicable to only the one specification number that ap-
pears below.)
SPECIFICATION NUMBER
6101A-1
A-1