TM 9-4110-246-14
TO 40R7-5-10-1
Malfunction
Test or Inspection
Corrective Action
3.
NEITHER PILOT LIGHT NOR VAPOR PROOF LIGHT WORKS WHEN SWITCH IS SET TO ON
(CONTINUED).
Step 4.
If power cord, female receptacle, male receptacle, and switch check out OK, door frame panel
assembly wiring is defective.
Section VI. UNIT MAINTENANCE PROCEDURES
3-12.
PROCEDURES.
3-13.
SUMMARY PROCEDURES.
A.
INITIAL SETUP.
Test Equipment
Materials
Four-inch Sealing Tape
TOOLS:
Screwdriver, Flat Tip
Personnel Required (4)
Screwdriver, Philips Head
Two or three persons to
Hex Wrench (4, supplied
position panel assemblies.
with refrigerator)
One or two to lock camlocks.
Knife, Pocket
3-17