TM 9-4110-246-14
TO 40R7-5-10-1
3-36. REMOVE/INSTALL VAPOR PROOF LIGHT FIXTURE.
TOOLS: Screwdriver, Flat Tip
REMOVAL
WARNING
The light circuit operates on 125V ac. Disconnect power to power receptacle before
beginning this procedure. Failure to heed this warning may result in death or injury.
1. Unthread and remove globe (1) and bulb (2).
2. Remove screws (3) with screwdriver and carefully pull vapor proof light fixture (4) away from door frame panel
assembly.
3. Tag and disconnect wires (5) from vapor proof light fixture (4). Remove vapor proof light fixture and gasket (6).
INSTALLATION
1. Position gasket (6) over wires (5) on panel assembly. Connect wires (5) to vapor proof light fixture (4) as tagged.
Remove and discard tags.
2. Thread screws (3) through vapor proof light fixture (4), gasket (6), and into door frame panel assembly. Tighten
the screws (3) with screwdriver.
3. Install bulb (2) and globe (1) into vapor proof light fixture (4).
4. Reconnect power to power receptacle.
3-42