UNIT MAINTENANCE INSTRUCTIONS
SECTION I REPAIR PARTS, TOOLS, SPECIAL TOOLS, TEST, MEASUREMENT,
AND DIAGNOSTIC EQUIPMENT (TMDE), AND SUPPORT EQUIPMENT
COMMON TOOLS AND EQUIPMENT.
a. For authorized common tools and equipment, refer to the Modified Table of Organization and Equipment (MTOE),
CTA 50-970, or CTA 8-100, as applicable to your unit.
b. The Shop Equipment (1), Automotive Vehicle (SC 4910-95-CL-A-74) will be used for all maintenance tasks. Any
additional tools required for an individual maintenance task will be identified in the setup information for that task.
SPECIAL TOOLS, TMDE, AND SUPPORT EQUIPMENT.
a. The Repair Parts and Special Tools List (RPSTL) (TM 9-4110-254-24P) as well as the Maintenance Allocation
Chart (MAC) (appendix B) identify any tools and support equipment needed to maintain the refrigeration unit.
b. There are no special or fabricated tools required to maintain the refrigeration unit.
a. Any mandatory replacement parts needed for the maintenance tasks are identified in the mandatory replacement
b. Repair parts are listed and illustrated in the repair parts and special tools list (TM 9-4110-254-24P) covering unit
maintenance for this equipment.
SECTION II SERVICE UPON RECEIPT
SITE AND SHELTER REQUIREMENTS.
a. The refrigeration unit requires a source of 208/230 Vac, 50/60 Hz, 12 amp electric power connected directly to the
input power enclosure assembly.
b. The refrigerator enclosure must have an accessible wall area 35.0 in. (88.9 cm) wide and 56 5 in. (143.5 cm) high
to accommodate the refrigeration unit.
c. The refrigeration unit weighs 790 lb (358 Kg). The refrigerator enclosure wall must be strong enough to support