4-30. REPEAT CYCLE TIMER TM1 TESTING AND REPLACEMENT. - Continued
Terminal hardware is supplied with repeat cycle timer
Tag wire lead terminals (7) and remove seven screws (8), lock washers (9), and wire lead terminals
Remove two self locking nuts (10), screws (11), and relay mounting socket (6) Discard self locking nuts
Install relay mounting socket (6), two screws (11), and new self locking nuts (10).
Using tags and wiring diagram (fig 1-4), install wire lead terminals (7), seven lock washers (9), and
screws (8) Remove tags
Push repeat cycle timer (5) into relay mount socket (6) and install new tie down strap (4)
Close control panel (3) Install two new lock washers (2) and bolts (1)
Unlatch and close control box cover door
Connect power and put unit back into service.