4-38. V-BELT REPLACEMENT AND ADJUSTMENT - Continued
If the V-belt (6) tension cannot be adjusted within the range of motor mount plate (5) travel, loosen four
bolts (13) and slide AC motor (11) on motor mount plate as necessary. Be sure pulley (7) and sheave (9)
are aligned and tighten four bolts Repeat above step to adjust V-belt tension
Turn self locking nut (12) counterclockwise against motor mount plate (5).
Figure 4-33. V-Belt
Close left side door.
Close front bottom door
Connect power and put unit back into service.