TM 9-4110-254-14
5-16. ISOLATION VALVES REPLACEMENT.
This task covers.
a Removal
b. Installation
INITIAL SETUP
Materials/Parts:
Equipment Conditions:
Teflon Seal (2)
Right side door open.
a. Removal.
(1) Remove two isolation valve caps (1).
(2) Loosen two flare nuts (2) and move copper tubing (3) away from isolation valve (4) being careful not to bend or
kink tubing.
NOTE
Isolation valve flare connections are different sizes Note location prior to removal.
(3) Remove two isolation valves (4) and teflon seals (5).
Figure 5-12. Isolation Valves
5-34