TM 9-4110-258-13
4.26 CONTACTOR (POWER RELAY) K2 TESTING AND REPLACEMENT. - Continued
c.
Installation..
(1) Install contactor (4), four flat washers (8), new lock washers (7), and bolts (6).
(2) Using tags and wiring diagram (fig. 1-4), install wire leads (5). Remove tags.
(3) Close control box cover (2). Install six screws (1).
Figure 4-20. Contactor
NOTE
FOLLOW-ON MAINTENANCE:
Unlatch and close control box cover door.
Connect power and put unit back into service.
4-58