TM 9-4110-258-13
NOTE
Note flow direction prior to removal.
(2) Remove self locking nut (2), flat washer (3), bolt (4), flat washer (5), and dehydrator (6). Discard self
locking nut.
(3) If filter drier clamp (7) is damaged, remove four bolts (8), lock washers (9) and clamp. Discard lock
washers.
b. Installation.
(1) If removed, install filter drier clamp (7), four new lock washers (9) and bolts (8).
NOTE
Do not remove dehydrator protective caps until just before installation. This will minimize the risk
of contaminating the dehydrator.
Be sure to observe flow direction noted during removal.
(2) Install new dehydrator (6), flat washer (5), bolt (4), flat washer (3), and new self locking nut (2).
(3) Tighten two flare nuts (1).
NOTE
FOLLOW-ON MAINTENANCE:
Close left side door.
5-31