TM 9-4120-357-14
(1) Install insulation on suction line.
(2) Slide mist eliminator into channels in
front of
evaporator coil, making sure that mark is
facing front.
(3) Position top panel on air conditioner, and secure with 31 screws and washers.
(4) Place evaporator discharge grille on
front of
air conditioner and secure with 16
screws and washers.
(5) Install right-hand evaporator intake grille on air conditioner with 12 screws and washers.
(6) Position front access panel on air conditioner, with lower edge behind step in base plate. Push into position
against casing, and secure with four panel fastener screws.
5-64