TM 9-4120-370-14
TO 35E9-229-1
4-3. UNPACKING - Continued.
d.
Remove pallet. Attach an overhead hoist with an appropriate sling and spreader bar to the lifting fittings pro-
vided at each side of the cabinet. Raise the cabinet and remove the four carriage bolt assemblies that hold the
tiedown bars to the pallet from the underside of the pallet. Remove the four bolts that hold the two tiedown bars
to the unit base. Remove and retain the pallet and carriage bolt assemblies and the tiedown bars and bolts,
if reuse is anticipated. Be sure to remove all remaining barrier material from the underside of the cabinet base.
Lower the cabinet to the floor in the desired position and remove the sling and hoist.
The bolts used to anchor the cabinet base to the tiedown bars may be used to anchor
it in place in the installed location if the installation method allows for anchoring from be-
neath.