TM 9-4120-370-14
TO 35E9-229-1
4-10. INSTALLATIONS THAT REQUIRE REMOVAL OF
FABRIC COVER.
Some installations require removal of the condenser side fabric cover. This generally applies only when the air conditioner
is positioned inside with condenser and fresh air openings ducted to the outside.
NOTE
If air conditioner is to be installed with condenser side (rear) exposed, the fabric cover
should be left in place of possible.
a. Using screwdriver, remove twenty-six screws and flat washers and four lock washers.
b. Carefully remove the fabric cover. Store the cover in a safe place for future use.
c. Using screwdriver, reinstall all hardware removed in step a.
4-11. INSTALLATION INSTRUCTIONS.
All alterations to the shelter or facility into which the air conditioner is to be installed should be complete before installation
of air conditioner.
Attach an overhead hoist, sling, and spreader bar to the lifting fittings on each side of the cabinet.
a.
Move air conditioner into position and aline mounting holes.
b.
c.
Secure unit with appropriate mounting hardware.
Base -.4375-14 UNC-2B (4 holes)
Rear -.3125-24 UNF-3B (6 holes)
.190-32 UNF-3B (10 ho!es)
d. Seal all openings around cutouts for air conditioner; air and wate rtight. Use gasket, caulking, or other suitable
material.