TM 9-4120-370-14
TO 35E9-229-1
4-21. SERVICE VALVE COVER
Removal
a.
(1) Using screwdriver, remove six screws, lock washers, and flat washers.
(2) Remove cover.
b. Inspection
(1) Check that cover is not bent, cracked, or punctured.
(2) Check that gasket is not torn, loose, or missing.
(3) Check that information plates are readable and in place.
(4) Refer all repairs/replacement to direct support maintenance.
Installation
c.
(1) Aline mounting holes with casing fasteners.
(2) Using screwdriver, secure cover to casing with six screws, lock washers, and flat washers.