TM 9-4120-370-14
T035E9-229-I
4-23. CONNECTOR COVER PLATES
There are three connector cover plates on the air conditioner. See installation instructions (para 49) for access and addi-
tional information.
a.
Removal
(1) Using screwdriver and wrench, remove four screws and nuts.
(2) Remove cover plate,
b.
Inspection. Check that cover is not bent, cracked, or punctured, If damaged, refer to direct support
maintenance.
c.
Installation
(1) Aline mounting holes.
(2) Using screwdriver and wrench, install cover plate with four screws and nuts.