TM9-4120-370-14
TO35E9-229-1
4-25. LOWER FRONT PANEL AND CIRCUIT BREAKER ACCESS BAFFLE - Continued.
Installation
C.
(1) Set the bottom of the panel in position so that the flange is inside the lip on the cabinet base.
(2) Push the top of the panel back into position.
(3) Using screwdriver, secure panel to casing and baffle to panel.
Follow-on procedure: Connect power.
4-26. CONDENSER OUTLET GRILLES
Used only on models F36T-2S, F36T4-2S, and F36T4-2SA
Removal
a.
(1) Using screwdriver, remove four screws, lock washers, and flat washers from each grille.
(2) Remove grille(s).
Inspection. Check that grille is not bent or broken. If damaged, refer to direct support maintenance.
b.
Installation
c.
(1) Aline mounting holes with casing fasteners.
(2) Using screwdriver, secure grille(s) to casing with four screws, lock washers, and flat washers.