Follow-on procedures: 1. Install mist eliminator. (See para 4-33.)
(1) Insert ball and spring. Be sure that ball is above spring.
(2) Depress spring with screwdriver far enough to install cotter pin.
(3) Secure cotter pin.
Follow-on procedure: Install lower front panel. (See para 4-25.)
Preliminary procedures: 1. Remove conditioned air intake grille. (See para 4-30.)
4. Remove actuating cylinder access cover, (See para 4-20.)
(1) Using two wrenches, remove cap screw, spacer, flat washer, and nut from actuator link arm.