TM9-4120-370-14
TO35E9-229-1
4-47. JUNCTION BOX HARNESSES AND
LEADS
Preliminary procedure:
lnspection/Test
a.
(1) Check connectors for general condition and loose, broken, or missing contacts. Replace damaged connec-
tors.
(2) Check individual wires for loose solder connections, loose terminal lug connections, cut or frayed
insulation, and cut or broken wires.
(3) See wiring diagram (Figure 4-20) and continuity test individual wires. Repair or replace wires with no
Repair
b.
(2) See Table 4-3 (Wire List) for wire lengths and terminal/connector information.
Removal/installation. See Figure 4-64 for removal/installation information.
c.
Follow-on procedure: