(4) Place gasket into end cap.
(5) Connect wire leads using tag and wiring diagram. (See Figure 4-65.)
(6) Secure end cap to tube with four screws and washers.
Using tags and wiring diagram (Figure 4-20) solder leads to RFI filter assembly.
Place RFI filter assembly onto junction box with wire leads extending into box.
Using screwdriver, secure RFI filter assembly with four screws and lock washers.
Connect lead to transformer terminal X2 using tag and wiring diagram. (See Figure 4-20.)
Aline control relay and socket contacts and push relay firmly into socket and hold down springs
Using screwdriver, secure junction box cover with ten screws and lock washers.