TM 9-4120-370-14
TO 35E9-229-1
5-20. COMPRESSOR (B1) - Continued.
(5)
Unwrap the insulation from the suction line so that the joint on the compressor is exposed.
(6)
(7)
While purging the system with nitrogen, debraze the tubing. (See para 58 and para 59.)
Using two socket and ratchet wrenches, remove four nuts and washers from top of mounting foot and four
(8)
shoulder bolts, flat washers, and rubber washers from underneath side of unit.
Lift or tilt the compressor and remove rubber washer from under each of the four mounting feet.
(9)
If compressor burn out is suspected, use care when handling compressor to
avoid touching compressor sludge. Acid in sludge can cause burns.
(10) Carefully slide compressor from air conditioner.
(11) Check the compressor to see if a motor burn out is indicated.