TM 9-4120-371-14
5-4. EVAPORATOR AND
CONDENSER FAN
MOTOR (B2) REPAIR
See paragraph 4-64 for testing (installed), removal, and installation.
a. Authorized repairs. Direct support maintenance repair of the fan motor is limited to the replacement of
electrical plug, thermostat (thermal overload), bearings, rotor with shaft, and hardware items.
b. Disassembly. Disassemble motor only as necessary to do required repair. (See figure 5-1.)
(1) To replace connector (J12):
(a) Using screwdriver, remove four screws from terminal box.
(b) Remove terminal box.
(c) Remove four screws from connector (J12).
(d) Pull connector away from terminal box as far as wires will allow.
(f) Remove old connector.