TM 9-4120-371-14
For inspection and cleaning of installed coil, see para 465.
Preliminary procedure: Remove evaporator fan. (See para 4-63.)
a. Removal
(1) Check to see that power has been disconnected.
(2)
Lift mist eliminator straight up and out of guides.
(3)
NOTE
Tubes at bottom of evaporator header and elbow at bulkhead are most likely
disconnect points. See para 522 for disassembly of expansion valve.
(4)
While purging the system with nitrogen, debraze the tube joints to the evaporator. (See para 57
and 5-8.)