ARMY TM 9-4120-380-14
AIR FORCE TO 35E9-136-21
Figure 4-1. Typical Crated Air Conditioner
Do not allow anyone under equipment suspended from a lifting device. Do
not allow the unit to swing while suspended from lifting device. Failure to
observe this warning may result in injury to personnel and damage to the
Remove Pallet. Attach an overhead hoist with an appropriate sling and spreader bar to the lifting eyes
provided at top of the cabinet. Raise the cabinet and remove the carnage bolt assemblies that hold the tie down boards
to the pallet from the underside of the pallet. Remove the bolts that hold the tie down boards to the unit base. Remove
and retain the pallet and carriage bolt assemblies and the tie down boards and bolts, if reuse is anticipated. Be sure to
remove all remaining barrier material from the underside of the cabinet base. Lower the cabinet to the floor inthe desired
position and remove the sling and hoist.
Bolts used to anchor cabinet base to tie down boards may be used
to anchor it in place in installed location if installation method
allows for anchoring from beneath.
RECEIVING INSPECTION. Perform receiving inspection of the air conditioner as follows:
a Inspect the unit for damage incurred during shipment. If the equipment has been damaged, report the damage on
DD Form 6, Packaging Improvement Report.