ARMY TM 9-4120-380-14
NAVY EE-00-BA-MMA-010/7053-AC
AIR FORCE TO 35E9-136-21
4.24
REPAIR/REPLACE - Continued
b. Foam Gasket.
(1) Remove captive fasteners (2).
(2) Remove damaged gasket (11) from panel (3)
Acetone and Methyl-Ethyl Ketone (MEK) are flammable and their vapors can be
explosive. Repeated or prolonged skin contact or inhalation of vapors can be toxic. Use
a well-ventilated area, wear gloves, and keep away from sparks or flame.
(3) Clean area for new gasket, using acetone or MEK and a stiff brush
(4) Coat surfaces of metal and gasket with adhesive. Let both surfaces dry until adhesive is tacky but will not
stick to fingers
(5) Starting with an end, carefully attach foam gasket to metal surface. Press into firm contact all over.
(6) Install captive fasteners (2)
c.
Foam
(1) Remove damaged foam (1) from back of panel (3).
Acetone and Methyl-Ethyl Ketone (MEK) are flammable and their vapors can be
explosive. Repeated or prolonged skin contact or inhalation of vapors can be toxic. Use
a well-ventilated area, wear gloves, and keep away from sparks or flame (2) Clean area
for new foam, using acetone or MEK and a stiff brush
(3) Coat surfaces of metal and foam with adhesive. Let both surfaces dry until adhesive is tacky but will not stick
to fingers
(4) Starting with an end, carefully attach foam to metal surface. Press into firm contact all over
d.. Sponge Gasket.
(1) Remove 10 rivets (4) securing gasket (7) to panel (3) and gasket retainers (6).
(2) Remove damaged gasket (7).
4-45