ARMY TM 9-4120-380-14
NAVY EE-000-BA-MMA-010/7053-AC
AIR FORCE TO 35E9-136-21
Section IV. REMARKS MAINTENANCE ALLOCATION CHART
Reference
Remarks
Code
A
Visual Inspection
B
Replace 1/2-inch polystyrene screen
C
Replace neoprene rubber gasket
D
Replace rivets
E
Replace 1/2-inch polyurethane foam
F
Replace 1/4 X 3/4-inch polyurethane foam gasket
G
Use adhesive compound
H
Replace quarter turn fastener, ejector spring, thermo-plastic wear washer and splitting retainer.
I
Replace gasket retainer
J
Replace vinyl covered sponge gasket
K
Replace damper and/or pivot shaft
L
Clean filter with mild detergent and water
M
Replace rivetnut
N
Replace insulator bushings
0
Replace floating locknut on control box cover
P
Q
Cut leads and strip back on replacement item
R
Test for AC voltage application
S
Adjust setpoint to 185 Vac
T
Replace resistors
U
Fungus proof replacement part per MIL-V-173
V
Replace floating locknut.
W
Assemble replacement resistor with wire terminals and shrink tubing
X
Replace stand-off terminals
B-13