High voltage can kill.
2. Remove two screws and access cover.
3. Visually inspect for damage.
4. Check for leaks. Perform leak test if leakage is suspected. Refer to Paragraph
Use great care to avoid contact with liquid refrigerant or refrigerant
gas being discharged from any container under pressure. Sudden
and irreversible tissue damage can result from freezing. Wear
thermal protective gloves and a face protector or safety glasses in
any situation where skin or eye contact is possible.
Prevent contact of refrigerant gas with flame or hot metal surfaces.
Heat causes the refrigerant to break down and form carbonyl
chloride (phosgene), a highly toxic and corrosive gas. In case of
refrigerant leaks, ventilate area immediately.
2. Remove screw (14), lockwasher (11), two flat washers (12 and 16), and protective
caps with chain (15).
3. Remove two screws (1) and lockwashers (2) securing each valve (17).
5. Remove three screws (10), lockwashers (11) and flat washers (12) and mounting
bracket (13) if necessary.
6. Inspect and replace valves if damaged.
1. Connect valves (17) to flare nuts (18) and tighten.