TM 9-4120-388-14
4-26. CONDENSER COIL GUARD.
This task consists of:
b. Inspection
a. Removal
c. Installation
INITIAL SET-UP:
Equipment Condition:
Turn off power.
Disconnect input power to the air conditioner before performing any internal
maintenance. Voltages used can KILL. Shutting the unit off at the control panel
does not disconnect unit power.
a Removal.
(1) Remove four screws, Iockwashers, and flat washers from lower flange.
(2) Remove four flat washers and screws from upper flange.
(3) Remove guard.
b. Inspection. Be sure that guard is not bent, cracked, or otherwise damaged. If damaged, notify your supervisor.
Installation.
c.
(1)
Align mounting holes with casing fasteners.
(2)
Secure guard to casing with four screws and flat washers in top flange and four screws, Iockwashers, and
flat washers in bottom flange.