TM 9-4120-388-14
This task consists of:
a. Removal
b. Inspection
c. Installation
INITIAL SET-UP:
Equipment Condtion:
Fabric cover removed (4-10).
Disconnect input power to the air conditioner before performing any Internal
maintenance. Voltages used can KILL Shutting the unit off at the control panel
does not disconnect unit power.
a. Removal.
(1) Loosen six captive turnlock stud fasteners in discharge (outlet) grille.
(2) Remove grille.
(3) Remove two top screws and flat washers from CBR cover and fresh air inlet screen.
(4) Remove twelve screws and packing with retainers from top panel.
(5) Remove top panel.
4-54