TM 9-4120-398-14
5-15. ACCUMULATOR (cont)
b. Installation.
(1) Install accumulator (2) to bracket (7) with nut (9) and lockwasher (10).
(2) Install two bolts (4), Iockwashers (5), washers (6), and strap (8) to the bracket.
(3) Install two bolts (4), Iockwashers (5), and washers (6) to bracket (7) and bulkhead.
(5) Braze refrigerant lines to accumulator using the procedures given in paragraph.
5-7.
(6) Install insulation over lines. Cover slit in insulation with plastic electrical tape.
(7) Leak test using the procedures given in paragraph 5-8. Repair leaks as necessary.
(9) Recharge system with refrigerant R-22 using the procedure given in paragraph 5-10.
5-40