(1) Install terminal board TB3 (1), four lock washers (4), four lock nuts (3), and four
(2) Connect all wires to terminal board TB3 (1) and remove tags.
(3) Condition air discharge guard installed. (See para. 3-5).
EVAPORATOR FAN ASSEMBLY.
This Task Covers:
Tool kit, Refrigeration
Air conditioner shut down and cool.
Conditioned air discharge guard removed (See para. 3-5).
is used in operation of this equipment.
D E A T H ON CONTACT
may result if personnel fail to observe safety precautions.
Never work on electrical equipment unless there is another person
nearby who is familiar with operation and hazards of equipment and
who is competent in administering first aid. When technician is
aided by operators, he must warn them about dangerous areas.
Whenever possible, input power supply to equipment must be shut
off before beginning work. Take particular care to ground every
capacitor likely to hold a dangerous charge. When working inside,
after power has been turned off, always ground every part before
touching it. Be careful not to contact high voltage connections of
208 volts ac input when installing or operating this equipment.