ELECTRICAL ACCESS PANEL. - continued
Dry cleaning solvent used to clean parts is potentially dangerous to personnel
and property. Do not use near open flame or excessive heat. Use in well
Clean the panel with a rag dampened with a detergent solution or dry cleaning solvent. Use a soft brush if
necessary to dislodge caked on dirt. Dry the item thoroughly.
(1) Position rubber gasket (18) and connector (17) onto access panel (8) and secure with four sets of
screws (14), lock washers (16), and nuts (15).
(2) Position connector (13) onto access panel (8) and secure with two sets of screws (9), lock washers (12),
flat washers (11), and nuts (10).
(3) Position access panel (8) onto unit and align mounting holes. Secure with four sets of screws (5), lock
washers (6) and flat washers (7) and 13 sets of screws (3) and lock washers (4).
(4) Carefully work control panel (2) onto unit and tighten captive mounting screw (1) to secure in place.