TM 9-4120-401-14
MIST ELIMINATOR.
d. Install
c. Inspect
b. Clean
a. Remove
This task covers:
INITIAL SETUP
Equipment Conditions:
Tools
Refrigeration Unit Service Tool Kit
Scrub Brush
Use disconnect switch (NOT POWER
Materials/Parts
CABLE) to disconnect power to unit.
Damage to cable connector pins will
Mist Eliminator
result if cable is used.
Dry Cleaning Solvent
Disconnect power at power source.
Detergent
a. Remove.
Pull mist eliminator (1) up and out of mounting frame.