TM9-4120-401-14
4-25.
C O N T R O L PANEL. - continued
NOTE
The control panel is normally located in the front of the unit. If it is remote
mounted, see facility or shelter manual.
a. Remove.
Loosen captive mounting screw (1) and carefully work control panel (2) from unit.
b. Inspect.
If the control panel is damaged beyond repair, replace it with a new control panel.
c. Repair.
d. Install.
Carefully work control panel (2) into unit and tighten captive mounting screw (1).
e. Adjust.
Set controls for desired mode of operation.
NOTE
FOLLOW-ON MAINTENANCE:
Connect power at power source.
4-66