TM 9-4120-401-14
4-30.
c. Replace.
(3) Remove three sets of screws (2), bck washers (3) and flat washers (4).
(4) Lift relay and bracket assembly (5) to access bracket (6) mounting hardware.
(5) Remove three sets of screws (7), lock washers (8), and fiat washers (9) and screw (10), lock washer
(11), four flat washers (12), and lock washer (13).
(6) Cut wire ties as necessary to slip bracket (6) and fitter (1) out of unit as far as wiring harnesses will allow.
WARNING
Capacitors can retain a high electrical charge. Touching the terminais of a
charged capacitor can result in severe electrical shock and skin burns. Always
ground the terminals of a capacitor as soon as they are exposed.
(7) Disconnect the P15 and P16 piugs from the filter (1).
(8) Discharge filter capacitors at connector, (J15).
(9) Remove four sets of screws (14), lock washers (15), fiat washers (1 6), and bracket (6).
(10) Secure filter (1) to bracket (6) with four sets of screws (14), lock washers (15), and flat washers (16).
(11) Connect the P15 and P16 plugs to the filter (1).
(12) Carefully slip bracket (6) and filter (1) into unit and secure bracket to casing with three sets of screws
(7), lock washers (8), and fiat washers (9) and screw (10), lock washer (11), four fiat washers (12), and
lock washer (13).
(13) Secure relay and bracket assembly (5) with three sets of screws (2), lock washers (3), and flat
washers (4).
(14) Attach wire ties as needed to secure wiring harnesses.
NOTE
FOLLOW-ON MAINTENANCE:
Connect power at power source.
4-78