TM9-4120-401-14
HOUSING.
This task covers:
a. Inspect
b. Service
INITIAL SETUP
Tools
Equipment Conditions:
Refrigeration Unit Service Tool Kit
Scrub Brush
Use disconnect switch (NOT POWER
CABLE) to disconnect power to unit.
Damage to cable connector pins will
result if cable is used.
Rags
Disconnect power at power source.
Dry Cleaning Solvent
Detergent
a. Inspect.
Check housing for cracks, dents, tears, or any signs of obvious damage. Notify supervisor if damaged.
Dry cleaning solvent used to clean parts is potentially dangerous to personnel
and property. Do not use near open flame or excessive heat. Use in well
ventilated area.
b. Service.
Clean the housing with a rag dampened with a detergent solution or dry cleaning solvent. Use a soft scrub
brush if necessary to dislodge caked on dirt. Dry the housing thoroughly.
NOTE
FOLLOW-ON MAINTENANCE:
Connect power at power source.
4-121