TM9-4120-401-14
INSTALLATION HARDWARE.
This task covers:
b. Replace
a. Inspect
INITIAL SETUP
Tools
Equipment Condition
Refrigeration Unit Service Tool Kit
Use disconnect switch (NOT POWER
CABLE) to disconnect power to unit.
Damage to cable connector pins will
result if cable is used.
Disconnect power at power source.
NOTE
Each unit is supplied with mounting hardware for the four base attachment points.
a. Inspect.
Inspect hardware to be sure it is tight, properly installed, and in good condition.
b. Replace.
Replace missing, damaged, or defective parts.
NOTE
FOLLOW-ON MAINTENANCE:
Connect power at power source.
4-123