Allow heater to cool before touching. Severe burns can result from touching hot
(c) Remove heater clip (9) and heater (8).
(d) Replace grommet (10) if damaged.
(e) Install heater (8) and secure with clip (9).
Slip wire leads through grommet (10), retainer ring (7), and connection box. Attach to terminals F
(g) Secure wire leads with a tiedown strap (11).
(h) Secure connector (6) to compressor with four screws (4), flat washers (5), and retainer ring (7).
(4) install cover (3) and secure with screw (1) and lock washer (2).