TM 9-4120-402-14
4-18. FRESH AIR (INLET) SCREEN OR COVER. - continued
WARNING
Dry cleaning solvent used to clean parts is potentially dangerous to personnel and property. Do
not use near open flame or excessive heat. Use in well ventilated area.
b. Clean.
Wipe or vacuum all dust and dirt off guard. Clean with a cloth dampened with a detergent solution or dry
cleaning solvent. Use a soft brush if necessary to dislodge caked on dirt. Dry thoroughly.
c. Replace.
(1) Remove five sets of pan head screws (3) and flat washers (4) and four flat head screws (5) from screen (1)
or cover (2).
(2) Remove screen (1) or cover (2).
(3) Aline screen (1) or cover (2) mounting holes with casing fasteners.
(4) Secure screen (1) or cover (2) to casing with five sets of pan head screws (3) and flat washers (4) and four
flat head screws (5).
4-67