TM 9-4120-402-14
4-20. LOWER FRONT COVER.- continued
WARNING
Dry cleaning solvent used to clean parts is potentially dangerous to personnel and property. Do
not use near open flame or excessive heat. Use in well ventilated area.
b. Clean.
Wipe or vacuum all dust and dirt off guard. Clean with a cloth dampened with a detergent solution or dry
cleaning solvent. Use a soft brush if necessary to dislodge caked on dirt. Dry thoroughly.
c. Inspect.
(1) Check that cover (3) is not bent, cracked, or punctured. If damaged, notify supervisor.
(2) Check that gasket (4) is not torn, loose, or missing. If damaged, notify supervisor.
d. Install.
(1) Aline cover (3) mounting holes with casing fasteners.
(2) Secure cover (3) to casing with 22 sets of screws (1) and flat washers (2).
NOTE
FOLLOW-ON MAINTENANCE:
Connect power at power source.
4-71