TM 9-4120-403-14
TABLE 3-1. OPERATOR'S TROUBLESHOOTING (Cont)
MALFUNCTION
TEST OR INSPECTION
CORRECTIVE ACTION
3. COMPRESSOR STARTS NORMALLY, BUT HIGH OR LOW PRESSURE CUT-OUT SWITCH SOON TRIPS.
Step 1. Check to be sure fabric cover is rolled up.
Roll up and secure fabric cover.
Step 2. Check to be sure condenser air inlet and outlet are not obstructed.
Remove obstructions.
Step 3. Reset (PUSH) PRESSURE CUT-OUT switch(es) and restart unit.
If unit does not start notify your supervisor.
3-4