TM 9-4120-403-14
Removal
(1) Snap filter out of spring clip.
(2) Carefully remove filter.
Cleaning
(1) Wash filter in a mild detergent and water solution.
(2) Rinse thoroughly in clean water.
(3) Shake out excess water prior to installation.
Inspection
(1) Check filter for punctures, cuts, and damaged edges that would allow passage of unfiltered air.
(2) Check filter for packed or mashed areas that would block air flow.
(3) Replace damaged filter.
Installation
NOTE
Be sure air flow arrow points to evaporator fan as shown in figure 4-21.
(1) Position left side of filter in bracket.
(2) Carefully push right side of filter to engage spring clip.
Follow-on procedure: Install intake grille assembly (para 4-22)
4-49