TM 9-4120-404-14
3-45. TERMINAL BOARDS (TB1), (TB2), and (TB3).- Continued
a. Removal . - Continued
(1) Tag and disconnect all wires connected to terminal board TB1 (1), terminal board TB2 (2), and terminal
board TB3 (3).
(2) Remove two screws (4), cover (5), two spacers (6), two flat washers (7), two lock washers (8), and two nuts
(9).
(3) Remove two screws (10), two flat washers (11), two lock washers (12), two nuts (13), marker strip (14), and
terminal board TB1 (1).
(4) Remove two screws (15), cover (16), two spacers (17), two flat washers (18), two lock washers (19), and
two nuts (20).
(5) Remove two screws (21), two flat washers (22), two lock washers (23), two nuts (24), marker strip (25), and
terminal board TB2 (2).
(6) Remove two screws (26), two lock washers (27), two flat washers (28), cover (29), and two spacers (30).
(7) Remove two screws (31), two lock washers (32), two flat washers (33), marker strip (34), and terminal
board TB3 (3).
b. Installation.
(1) Install terminal board TB3 (3), marker strip (34), two flat washers (33), two lock washers (32), and two
screws (31).
(2) Install two spacers (30), cover (29), two flat washers (28), two lock washers (27), and two screws (26).
(3) Install terminal board TB2 (2), marker strip (25), two nuts (24), two lock washers (23), two flat washers (22),
and two screws (21).
(4) Install two nuts (20), two lock washers (19), two flat washers (18), two spacers (17), cover (16), and two
screws (15).
(5) Install terminal board TB1 (1), marker strip (14), two nuts (13), two lock washers (12), two flat washers (11),
and two screws (10).
(6) Install two nuts (9), two lock washers (8), two flat washers (7), two spacers (6), cover (5), and two screws
(4).
3-126